How Much Does a Pool Pump Cost?

The swimming pool pump is the core element of the swimming pool system. It directs the water to be filtered, heated and treated with chemicals. When a pool pump fails, the chemicals in the water won't work properly, algae can grow, and the water can become filled with dirt, leaves, insects, and other debris. On average, pool pumps last about 8 to 12 years before needing to be replaced. How much does a pool pump cost? Generally, pool pumps cost anywhere from $700 to $1,500, with many homeowners spending around $1,100.

A single-speed pump can cost as little as $500 to replace, while a higher-quality pool pump or one that requires additional plumbing can cost as much as $5,450. Factors that affect pool pump cost are the type, size, and brand of the pump; how often the pump is run; and the type of pool. Here, we'll look at additional costs and considerations that affect pool pump cost, the different types of pumps, and some telltale signs that a pool pump needs replacing.

One of the main factors affecting the cost of a pool pump is the size of the pump required for the pool in question. The first step in determining the correct pump size is to use the following formula to determine how many gallons of water your pool can hold.

- Measure pool length, width, and depth in feet. (For an inground pool with a deep end and a shallow end, use the average pool depth.) Multiply the length by the width to determine the surface area of the pool, then multiply that number by the depth to get the total cubic feet measurement.

- Multiply the cubic feet measurement by 7.5 to get the total gallons.

- Multiply the total gallons by 2, this is the ideal number of times the water should be turned per day.

- Divide this number by 24 to determine the gallons per hour, then divide that number by 60 to get the total gallons per minute, which is the size of most pool pumps.

For example, if a swimming pool is 12 by 24 feet, rectangular in shape, and has an average depth of 5 feet, the cubic foot measurement is 1,440 (12*24*5). This means that the pool holds a total of 10,800 gallons of water (1,440*7.5), or a turnover rate of 21,600 gallons (10,800*2) per day. This equals 900 gallons per hour (21,600 divided by 24) or 15 gallons per minute (900 divided by 60).

Pools of this size typically require a 1/4 to 1/2 horsepower pool pump. A pool pump professional can correctly size the pump you need based on your pool size and recommend the best option for each pool.

How much is a pool pump? It depends on several factors. Prices may vary from the national average due to the type and size of the pump; the type of pool; and the types of features the pool has.

The average cost of a pool pump installation ranges from $80 to $350, not including the price of the pump. There are many types of pool pumps, each of which works best in a specific type of pool. Pool pumps have unique features that affect their durability, longevity, ease of use, and energy efficiency. Some of the most common types of pool pumps are single-speed, two-speed, variable-speed, low-head, mid-head, high-head submersible, and solar.

Sizing the correct pump for your pool is essential for efficient water filtration. If the pump is too small, the water will stagnate and the pump may burn out from overworking. The pool pump should circulate all the water in the pool within 24 hours to keep the water clean, and fresh and the chemicals work effectively.

Larger and deeper pools require larger and more powerful pumps to keep the water properly filtered. The size of the pool pump also depends on whether the pool is above or below ground, or if the spa is located in or near the pool.

When answering the question "How much is a new pool pump?" it's important to understand any additional costs and considerations that might add to the overall price. These may include repair and replacement costs, maintenance, and any customizations.

It is more economical to repair your pool pump than to replace it. Repairs can range from $50 to $200, depending on what needs to be fixed. If your pool pump is rumbling or grinding, has a buildup of air bubbles, or has a small leak, it may need repair rather than replacement. Signs that your pool pump needs to be replaced include a faulty motor, loud noises, or large leaks.

Consistent pool maintenance will help extend the life of your pool pump. Regular cleaning, by the homeowner or one of the best pool cleaning services, can keep the pump from burning out from overwork. Homeowners should be aware of the energy-saving methods available to reduce pool maintenance costs through new technologies.

Some additional customizations can be installed to aid the function of the pool pump and help it work at its optimum level.

Pool pump timer. A handy pool pump timer can run anywhere from $50 to $100. A timer ensures the pump runs when needed and shuts off at the appropriate time to save money and electricity. Using the timer, homeowners can set the pump speed and schedule when to run the pump.

pool filter. Pool filters and pumps are usually installed together, but if the filter needs to be installed separately, prices can range from $225 to $2,900, with average costs ranging from $500 to $2,000. Pool filter prices vary by filter type and pool type.

pool cover. Pool covers help keep debris out and keep the water from getting dirty. The average pool cover ranges from $40 to $400, but prices can skyrocket to $2,700 for a mesh cover and as much as $3,700 for a solid cover.

One of the key factors affecting pool pump cost is the type of pool pump. Each type has its own characteristics and will benefit certain types of pools. Below are the most common types of pool pumps and their common uses.

A single-speed pool pump runs at one speed 24 hours a day. Because they use a lot of energy, the U.S. Department of Energy announced the need to replace single-speed water pumps with energy-efficient or variable-speed pumps by 2021.

Two-speed pool pumps have two speeds and use less energy when set to a slower speed. Some models can be adjusted by remote control, while others require manual adjustment. Slower speeds will save energy and money, and faster speeds are appropriate if water needs to be circulated through at a faster rate. Expect to pay $200 to $800 for a two-speed pool pump.

Variable speed pool pumps cost more upfront to install but save money over time. It uses significantly less energy than other types of pool pumps, and homeowners pay less for their electricity bills. Variable speed pumps provide faster turnover and operate at softer dynamic levels than other pool pumps. They range in price from $800 to $1,200.

Low-head pool pumps are designed to be used with water features to circulate water quickly. It is suitable for high-flow water conditions, but not for use with filters. Low-head pumps range in price from $150 to $650.

Medium-head pumps are the most common of all pool pump types and can cost between $300 and $800. They are easy to install and work with most types of plumbing options. These pumps are available for above-ground and in-ground pools.

High-head submersible pumps are used in swimming pools with water features, slides, and spas. They use a 3-inch pipe instead of the standard 1.5-inch pipe to circulate water in pools that require more water turnover. Pools with extensive water features require high-head submersible pumps, which can cost anywhere from $800 to $1,300.

Solar pool pumps are one of the most expensive options. They cost anywhere from $500 to $2,000, depending on individual characteristics and size. Installation and labor costs are also more expensive than more common pool pump options. Solar pumps have a higher upfront cost, but they can save homeowners money because they're not powered by a conventional power source. Many districts offer incentives and rebates for installing solar pumps or solar heaters in swimming pools.

If your pool pump is making odd noises, is leaking, or is more than 10 years old, it may need to be replaced. The average cost of a pool pump depends on the type of pump and pool, and how many hours it will run. Here are some red flags that indicate it's time for a new pool pump.

Rumbling noises are produced when the pump vibrates excessively. This can be fixed with a repair, but the grinding noise indicates that the bearings are old and loose. The bearings can be replaced by an experienced pool professional, but if the problem is not fixed immediately, the pump may be damaged and need to be replaced.

Leaking pool pumps are one of the most common problems for homeowners with pool experience. When your pool pump starts leaking, it's time to replace it.

A loose or displaced pump will cause the pump to rumble. Sometimes a pool professional can fix a loose pump, but if they can't, the pump needs to be replaced.

Pool pumps can last 8 to 12 years, but sometimes they can fail earlier, even if you pay for regular pool maintenance. If your pool pump is about 10 years old, it may be worth investing in an energy-efficient pump that will save you money in the long run.

The above introduces the cost of installing a swimming pool pump and when the swimming pool pump needs to be replaced. If you want to buy a swimming pool pump, please contact us.

MAYGO POOL is a professional custom pool pump and accessories manufacturer. We can provide professional technical solutions for residential and commercial swimming pools. Since its establishment, MAYGO POOL has successfully developed the impeller, the main component of CFD hydraulic design. Our product range includes pool pumps, sand filters, cartridge filters, filtration systems and pool accessories. Products are constantly updated and iterated, with more functions and more choices.